Suporte
Detalhes
The rH-PWM2S2 module is a double PWM controller integrated with a double transmitter. The module sends information to the system about the opening or closing of two contacts and controls two low voltage receivers powered from an external source (12 VDC).
The module has two electrical inputs for the connection of two monostable potential free contacts, as well as two outputs for the connection of 12 VDC receivers. The power regulation is performed by pulse width modulation (PWM). The frequency of the pulses is set in the range 100 Hz to 1 kHz. The communication with the server takes place by radio.
Symbol in design and configuration software:
The rH-PWM2S2 module is represented by object that consists of two channels that read the power and time information from their inputs. The assigned algorithm limits the maximum power for each channel, and controls the connected devices (LEDs or other loads) in compliance with the start/stop times and attributed power levels. The confirmed status of each channel is provided on its output as a feedback. The element also has two inputs and two outputs, separate for each physical input. Shorting or opening a contact changes the logic state at the corresponding output (0/1).
Installation:
- Make sure the 12 VDC power source is switched off.
- Connect the wires according to the diagram above.
- Place the module in a suitable installation box.
- Adjust the antenna wire parallel to one of the server antennas, as far as possible from the other wires.
- Switch on the power source.
- Register the device in the system.
- Close the installation box.
An example application:
In the diagram above, the F2106 module is used to switch on/off and alter scenes in two areas or rooms. A change is triggered by a momentary switch connected to the pins 1 or 3 of the module and executed by the first or second logical object. A change of the state at pins 2 or 4 switches off the relevant light scene. The F1430 module can control an RGB LED strip to change effective color of the light in the scene. The F1432 module can control the brightness of the light. This object is connected with the F2106 module. Momentary switches connected to its inputs can switch off the scenes.
About the system:
Specifications
Name | F&Home Radio rH-PWM2S2 |
Code | F1432 |
Power | 12 VDC / 30 mA |
RF communication band [MHz] | 868 |
Communication mode | two-way |
Data encryption | YES |
Open space range | 100 m |
Loads | 2 x 4 A / 12 VDC |
Smooth switching-on (increasing power from 0 to a set value) | 0.2 s ... 30 s |
PWM frequency | 100 ... 1000 Hz (step 100 Hz) |
Inputs | 2x (for potential free contacts, to "-") |
Battery monitoring | YES |
Operating temperature range | -20ºC ... 50ºC |
Operating humidity / environment | <= 85% (no condensation of water vapor) / no aggressive gasses |
Protection measures against | overloading (overheating) overvoltages on the receivers |
Dimension [mm] | 48x48x22 |
Ingress protection rating | IP 20 |
F&HOME RADIO integrates electrical installations in such a way that the processes of heating, air conditioning, ventilation, lighting, alarm and access control form one efficient system - all for the safety and comfort of the residents. With wireless two-way communication between the central unit (server) and both sensors and actuators, software solutions, as well as remote control of the system that can performed by the users in many ways, the system allows them to manage home energy resources in a manner appropriate to their needs.
In practice, this means the ability to integrate electrical appliances in such a way that a hand gesture can create a romantic light scene in the living room and bedroom, pull down the shutters or blinds and adjust the interior temperature, for example. The option of remote control via the Internet ensures that even after our return from a long journey we are welcomed by the house as if we have never left.
Especificações
Nome | Módulo RH-PWM2S2 | ||
Tipo de Produto | Transmissor, Relé, Controlador LED | ||
Sistema | F&Home Radio | ||
Montagem | Caixa de entrada | ||
Tipo de transmissão | Bidirecional | ||
Frequência | MHz | 868 | |
Aplicações | interior | ||
Número de relés | 2 | ||
Parâmetros de relé | corrente máxima | A | 4 |
tensão máxima | V | 12 | |
tipo de contato | PWM | ||
Número de transmissores | 2 | ||
Parâmetros do transmissor | corrente de contato | µA | 250 |
tensão | V | 12 | |
Parâmetros do receptor | número | 2 (LED) | |
Frequência PWM | Hz | 100...1000 | |
S | 0.2...30 | ||
Fonte de energia | tensão | VDC | 12 |
Gama | m | 100 | |
Temperatura de operação | °C | -20...50 | |
Humidade | 0...85 | ||
Dimensões | mm | 48 × 48 × 22 |