PT
PL
EN
CZ
DE
IE
HU
RO
SK
ES
Detalhes
The emergency exit button APWK-LED is designed for use in access control (AC) and intrusion and hold-up alarm (IHA) systems. It is used for the direct, emergency release of access point locks (e.g. solenoid locks or electric strikes) in the event of a controller failure or in emergency situations. It is activated by pressing the push plate, which is protected against accidental use by a transparent protective flap. The device is reset to surveillance mode using a dedicated service key (included). The button features universal NO/NC contacts and 3 independent relay outputs with a maximum load capacity of 125 V / 3 A, ensuring compatibility with a wide range of actuators. The integrated visual and audible signalling is configured using jumpers on the PCB. A two-colour LED indicates the monitoring status (green) or alarm status (red), with the red LED capable of operating in continuous, flashing or off modes. The built-in piezoelectric transducer with adjustable sound intensity offers continuous, intermittent or silent operating modes. The device’s mechanical design allows for surface-mounted or flush-mounted installation using an installation box, in accordance with the instructions in the manual.
Key features:
- supply voltage: 12–24 V DC
- audible alarm modes: continuous / intermittent / silent
- volume control
- visual indication: two-colour LED (green – monitoring / red – alarm)
- device status indicator: mechanical activation indicator on the pressure plate
- lock/reset: mechanical (requires a service key, supplied in the set)
- relay outputs: 3 x NO/NC (max. load capacity 3 A)
- installation method: surface-mounted / flush-mounted (using a mounting box)
- material: ABS
Especificações
| Modelo | |||
| Marca | Yotogi | ||
| Sistema | Controle de acesso | ||
| Tipo de Produto | Botão de saída | ||
| Material | ABS | ||
| Cor | verde | ||
| Instalação | Montagem em superfície, Montagem embutida | ||
| Parâmetros | |||
| Interfaces de saída | Saída de relé NA, NF, COM | pcs. | |
| Tipo de Contato | NA, NF, COM, NA, NF, COM | ||
| Recursos selecionados | Redefinir com uma chave dedicada, Redefinir com uma chave dedicada, Indicadores LED, Indicadores LED | ||
| Fonte de energia | DC | V | 12, 12 |
| Classificação de proteção | IP24, IP24 | ||
| Temperatura de operação | °C | -30...+70, -30...+70 | |
| Dimensões | mm | ||
| Peso | kg | ||
