MEU CARRINHO
O meu Carrinho está vazio

Projector Wall Mount: PD103L (distance adj.)
Código: E9652
Este produto ja nao esta disponível
Projector Wall Mount: PD103L (distance adj.)
View of the mount
Sketch of the mount
The PD103L E9652 mount has been designed for mounting a multimedia projector on a vertical wall. Its load capacity is 15 kg. The mount allows 360 deg rotation, and due to long telescopic construction of the arm - easy (without additional tools) adjustment of the distance between projector and wall. It also has tilt adjustment up to 30 degrees.
The wall has to carry the load of the panel and the mount, including a wide margin of safety.
The mount cannot be installed on walls that do not provide firm hold (steel stud, old cinder block, plaster panel etc). If you are uncertain about the nature of the wall, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.
The basic required tools (not included): 3/16" drill bit for mounting on wood / metal constructions, 1/2" masonry bit for brick / concrete block installations, electric drill, wrench or socket set, Phillips screwdriver.
Safety warning.
The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer. Improper installation may cause damage or serious injury.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.
Some operations (e.g. hanging the projector) should be performed by two skilled people!
Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect assembly and mounting or improper use.
Specifications
NameProjector Wall Mount PD103L
CodeE9652
Distance from wall410 - 630 mm
FDMI / MISVESA
Load capacity15 kg
Tilt adjustment30°
Rotation range360°
Dimensions182 x 120 x (410 - 630) mm
Weight1.9 kg
Packaging unit: 10 pcs. Price for one piece.
Este produto ja nao esta disponível
 
Projector Wall Mount: PD103L (distance adj.)
Código: E9652