View of the shelf - visible cable opening and hole plug

Sketch of the shelf

The DS-103CB E9662 shelf has been designed for holding home devices like DVD player/recorder, sat receiver, set-top box etc. Maximum capacity is 30 kg. Glass shelves are made of tempered glass of 8 mm thickness. The support has been made of aluminum - it is light and very stable. Cable management system allows to hide connecting cables.

The wall has to carry the load of the panel and the mount, including a wide margin of safety.

The shelf cannot be installed on walls that do not provide firm hold (steel stud, old cinder block, plaster panel etc). If you are uncertain about the nature of the wall, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.

The basic required tools (not included): 3/16" drill bit for mounting on wood / metal constructions, 1/2" masonry bit for brick / concrete block installations, electric drill, wrench or socket set, Phillips screwdriver.

Safety warning.

The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.

Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.

Name	DVD shelf DS-103CB
Code	E9662
Dimensions (W x H x D) [mm]	445 x 735 x 335
Load capacity [kg]	30
Structural components	aluminum
Finish	powder paint
Number of shelf levels	3
Shelf material / thickness [mm]	tempered glass / 8
Cable hiding system	YES
Weight [kg]	12.5