View of the cable - 200 m coil
High quality coaxial cable from TRISET family, used in 5 to 2150 MHz band. Both the shielding and inner conductor are made of copper. This material guaranties long life of the cable and stability of parameters. The cable can be buried directly in the ground, on the condition that it is protected from mechanical damage. Braided copper-shielded cables are not gel-filled.
The cable can be used in SMATV/MATV systems for connecting subnetworks. The sheath of the cable is made of PE that is UV-proof and suitable for outdoor applications.
The TRISET family of coaxial cables gained the Product of the Year
award in "Accessories" category at SatKrak 2007 exhibition.
- PE sheath,
- copper braid,
- copper foil,
- copper inner conductor,
- low loss,
- perfect matching,
- high screening efficiency.
RoHS compliance declaration.
Screening efficiency better than 100 dB enables the installer to put many cables in parallel, which is indispensable in large multiswitch installations. The core of the cable (diam. 1.63 mm) is made of copper, which guarantees low loss, resistance to corrosion, and flexibility. The cable enables the users to build extensive community/cable installations. It is produced under strict technological discipline, with tight tolerances.
TRISET-11 PE Cu
| ||tolerance |
Mechanically foamed dielectric
|Width ||mm ||27|| +/-0.3|
|Overlap ||mm||>3|| +/-0.5|
|Thickness ||μm||50|| +/-3|
|Diameter of wires||mm ||0.15 ||+/-0.01 |
|Number of wires|
|Winding angle||deg||27|| |
|Thickness ||mm ||1||+/-0.1 |
|Color|| || black|| |
| Minimum bending radius||mm||100|| |
|Core resistance at 20°C||Ω/km||8.3|| +/-0.5|
|Braid resistance at 20°C||Ω/km||11.5 || +/-0.5|
|Resistance of dielectric||MΩ/km|| 2000||+/-3%|
|Wave reduction factor||%|| 84||+/-1|
Attenuation (theoretical) [dB/100m]
Attenuation (measured) [dB/100m]
| 23|| 22|| 20|
According to EN50117 norm, there are the next classes of coaxial cables, depending on screening efficiency: C, B, A, A+, A++.
Triset 11 features the best screening efficiency among distribution cables available on the market ( with parameters placing it between A+ and A++).
Classes of screening efficiency
Characteristics of the cable: BLUE - attenuation, RED - impedance matching.