MEU CARRINHO
O meu Carrinho está vazio
 »  TV/SAT  »  Cabos  »  Classe A

Cabos

Classe A

Cabo coaxial (75 ohm, classe A): TRISET-113 PE (gel-filled) [1m]
Código: E1017_1
Preço s/ IVAPreço c/ IVADesc.Validade  
0,63 EUR0,77 EUR0 %
5 Anos Garantia
TRISET Os cabos são compatíveis com Construction Products Regulation (CPR) e EN 50575 padrão harmonizado que especifica requisitos de desempenho de reacção ao incêndio, métodos de teste e avaliação para cabos eléctricos utilizados para o fornecimento de electricidade e para fins de controlo e comunicação destinados a obras de construção e sujeitos a requisitos de desempenho em reacção ao fogo.
TRISET-113 cables comply with the EN50117 standard and A-class requirements in the whole 5...3000 MHz transmission frequency range.

RoHS compliance declaration.

The cable is sold in the quantities:
Cabo coaxial (75 ohm, classe A): TRISET-113 PE (gel-filled) [1m]
O cabo coaxial de alta qualidade Triset-113 PE E1017_1 é utilizado em instalações de antenas individuais e da comunidade, sistemas de SMATV etc., para distribuição de DVB-T, FM / DAB, DVB-S / S2 transmissões (também em sistemas de multiswitch). Graças ao revestimento de PE, o cabo cheio de gel pode ser instalado ao ar livre, por exemplo, para ligar as antenas colocadas em telhados etc.
Key features
  • complies with A-class requirements
  • passed IEC 68-2-3 Steady State Damp Heat test
  • 1.13 mm copper core
  • low loss
  • perfect matching,
  • high screening efficiency - A+ class in the vast majority of the transmission range
  • 81% braid coverage
  • 5-year warranty
Cabo Triset-113 PE E1017_1 tem uma cobertura de malha de 81%, que é a base para a alta eficiência de triagem.

The high-quality, double shielded coaxial cable of RG6 category has the inner conductor made of copper wire with a diameter of 1.13 mm, which ensures low loss and durability. The copper wire core does not corrode and the cable is not stiff.
Thanks to high quality and excellent parameters, the cable enjoys great popularity among many installers. An optimum flexibility of the jacket allows for easy installation of the cable in cable ducts and installation boxes.
The cable is manufactured under strict technological discipline, with tight tolerances.
In order to secure the minimum bend radius, flush mounted installations should be done with the use of protective tubes.
Screening efficiency of TRISET-113 cable in the 30-3000 MHz range
and the requirements for A class
Cabo coaxial (75 ohm, classe A): TRISET-113 PE (gel-filled) [1m]
Transfer impedance of TRISET-113 cable in 5-30 MHz range
and the requirements for A class
Cabo coaxial (75 ohm, classe A): TRISET-113 PE (gel-filled) [1m]
Insertion loss in the 5-2400 MHz frequency range
Cabo coaxial (75 ohm, classe A): TRISET-113 PE (gel-filled) [1m]
Return loss in the 5-2400 MHz frequency range
Cabo coaxial (75 ohm, classe A): TRISET-113 PE (gel-filled) [1m]
Signal propagation velocity in the 5-2400 MHz frequency range
Cabo coaxial (75 ohm, classe A): TRISET-113 PE (gel-filled) [1m]
The increase of attenuation after the accelerated aging test (IEC68-2-3) is below 5%
Cabo coaxial (75 ohm, classe A): TRISET-113 PE (gel-filled) [1m]
Coaxial cables undergo a natural aging process which results in increasing attenuation. The quality of a cable in the process of accelerated aging is tested according to IEC68-2-3 standard. The Triset cable passed the test and its quality is guaranteed by a 5-year warranty.
Specifications
NameTRISET 113 PE
CodeE1017
 
Copper core
Diametermm1,13
Physically foamed dielectric
Thicknessmm1,83
Diametermm4,80
Ovality (non-circularity) ± 2%
Al/PET/Al foil  30/12/30 µm
adhered to the dielectric
Widthmm18
Overlap mm >3
Total thicknessµm75
Braid
MaterialAluminum
Wire diameter
mm0,12
Number of wires
pc24 x 6
Winding angle
degree19,34
Braid coverage%81
Jacket
Material
PE
Thicknessmm0,8
Diametermm6,8
Color
Black
Electrical parameters
Resistance (20°C)Ω/km16,85  
CapacitancepF/m52
Dielectric resistanceMΩ/km2000
Impedance
Ω75
Wave reduction factor%84
Mechanical parameters
Operating temperature range
°C-30...+70
Installation temperature range
°C-5...+40
Minimum bending radius
mm35 (single)
70 (repeated)
According to EN50117 norm, there are the next classes of coaxial cables, depending on screening efficiency: C, B, A, A+, A++.
Taking into consideration cables for antenna systems, Triset 113 has the highest screening efficiency, between A and A+.
Classes of screening efficiency
Class\freq. range
5-30 MHz [mΩ/m]30-1000 MHz [dB]1-2 GHz [dB]2-3 GHz [dB]
C50756555
B1575 6555
A585 7565
A+2.595 8575
A++0.9105 9585
Price for 1m
Preço s/ IVAPreço c/ IVADesc.Validade  
0,63 EUR0,77 EUR0 %
 
Cabo coaxial (75 ohm, classe A): TRISET-113 PE (gel-filled) [1m]
Código: E1017_1
COMPLETE COM
SECÇÃO BIBLIOTECA
NOVOS TÍTULOS
PARA SABER MAIS